You Just Added:

Your
QTY:
Price:

Don't Forget!

Click For Details + Close
 
 

 
 
 

 

Customers Also Purchased

 
 
 

LampGard® Headlight Protection

Representative Image drag or hover to zoom

Representative Photo Gallery

LampGard BY WEATHERTECH
LampGard<sup>®</sup>  BY WEATHERTECH
LampGard_Installation12 BY WEATHERTECH
LampGard_Installation13 BY WEATHERTECH
LampGard_Installation14 BY WEATHERTECH
LampGard_Installation15 BY WEATHERTECH
LampGard_Installation16 BY WEATHERTECH
+ More Images
Share
 
Vehicle:
2012 Volkswagen Passat
Part Number:
Please Note:
 
Step 1 - Select your Quantity- 1 +
 
  
WeatherTech WeatherTech New LampGard® Volkswagen 2012 Passat LampGard® WeatherTech LampGard is an optically clear film that protects costly vehicle headlamps, turn indicators, parking lights and fog lights. The LampGard also helps prevent scratches and cracks from road debris.
  • Product Information
  • Videos
  • Lifetime Limited Warranty
  • Installation
  • Testimonials
  • FAQ
 

Product Information

LampGard

Protect your lights with the WeatherTech LampGard designed to specifically fit vehicle headlamps, fog lamps and turn indicators.  LampGard is an incredibly tough 40 mil. thick, double-polished urethane material that is optically clear and applies (peel & stick) directly to the surface.  This product has built-in ultraviolet inhibitors that help prevent the material from drying, hardening or discoloring.  We custom die-cut to fit your specific vehicle for a precise, perfect fit.

Easy Install

LampGard comes with easy-to-follow instructions and applies to headlamps, fog lamps, turn indicators and parking lights (when applicable) to protect them from scratching, cracking and pitting.  LampGard is available for most vehicle makes and models.  Some applications are built to order so please allow 14-21 days for delivery.

Videos

LampGard Sales Video

 

Lifetime Limited Warranty

Lifetime Limited Warranty

WeatherTech Direct, LLC warrants that our products will be free from any defects in manufacturing, materials and workmanship for the life of the original purchaser and only for the original vehicle they were installed in. Exclusions to this warranty include wear due to severe abrasive conditions, chemical contamination, such as spilled gasoline, bleach, vehicle accidents, misuse, abuse, incorrect installation, incorrect use, etc.

We are reasonable people and we believe in true customer satisfaction. Depending on the circumstance, we will either replace your product at no charge, charge you a prorated amount for a replacement, or issue a full or prorated refund. Our goal is to keep our customers happy for a lifetime and always reach a fair resolution to any issue.

Testimonials

Great Product. Great Protection.
Name: Cheryl Hilliard Jackson
Vehicle: 1999 Jeep Grand Cherokee
LampGard Headlight Protection offers exceptional protection for your headlamps. We bought mew headlamps because the original ones yellowed and became hazy so badly. It is important to read the instructions first before attempting to apply the product and to be carefully around the curves of your lamps. They will look a little hazy for two weeks or so but they will cleared up. We are very satisfied with the results and will be purchasing this product for our other car.
Amazing Product
Name: Tesfay
Vehicle: 2014 Toyota Corolla
The LampGard Headlight Protection is the very best product one can imagine. As many agree, need to follow the installation instruction for a best result especially on the curves and contour of the headlight. It was a little cloudy at first but after a while it became CRYSTAL CLEAR. Very much pleased with the product. DON’T MISS IT!!!
 
 
 
 
 

FAQ

 
Is this product Car Wash safe?
Yes. When properly installed, you can safely enter a car wash.
Does the LampGard kit include the Fog Lamps?
Depending on the year, make, and model of your vehicle, some kits may include the Fog Lamps. A fit note will be listed on our website if the model does not include the Fog Lamps.
How does LampGard curve over the headlamp? Mine won’t stretch all the way.
It may seem as though there is excess material around the edges. This is completely normal and is no cause for concern. Keep the material warm and continue making short squeegee strokes from the center outward, gradually working toward the edge of the lens. When working toward the edge, spread the excess material out rather than working it all into one spot. Once the excess is properly spread about the perimeter of the LampGard, the material will easily lay flat on the lens. We recommend that you seek professional assistance if you are continuing to have installation issues.
Will the bubbles go away?
Use the supplied squeegee to force the excess alcohol solution and air bubbles out to the edges of the LampGard. Over time, remaining air bubbles will disappear.
I have installed the LampGard kit on my headlights and they looked fine, but now they look foggy. Did I do something wrong?
When using the wet application technique, this is normal. The fog is the result of the alcohol/water solution evaporating from beneath the plastic. The water vapor that is produced results in a hazy appearance for several days. The haze will clear as the vapor dissipates.
Is it best to apply the LampGard kit to the lenses wet or dry?
In most cases, we have found that the wet installation yields the best-looking installation. On larger headlamp pieces, the wet installation method is recommended as bubbles and improper alignment of the material are far less likely. On smaller pieces, such as fog lamps, the dry installation method is sometimes easier. This is especially the case if the lamp is spherical in shape.
The lights on my car are heavily contoured. Is your kit hard to install on this type of light or should I have them professionally installed?
Our LampGard material is extremely pliable and can easily be contoured over dome shaped surfaces. Professional installation should not be necessary provided that you follow the instructions closely.
I have the LampGard kit almost completely applied using the wet application method, but I can't seem to get the edges to completely stick down. What am I doing wrong?
It is absolutely imperative that a hair dryer or heat gun is used in this area to seal the edges. The heat serves two purposes. First, applying heat helps evaporate the remaining alcohol/water solution from under the edges. Second, applying heat makes the plastic more pliable so that it can contour to the edge of the light. It is important to use caution when using a heat gun to warm the plastic. Only a small amount of heat is required. If you apply too much heat, you can damage the surface of the plastic.
What if I want to remove the LampGard kit at a later date?
The removal process is simply a matter of warming the plastic, and peeling the LampGard away from the surface of the headlamp. It may require significant pressure to pull the plastic away from the headlamp, but they normally the LampGards peel off without any residue left on the lens. If any adhesive remains on the surface of the headlamp, it can be removed by rubbing the excess adhesive with your thumb.
Share

SHARE THIS

Related Products for

Close