You Just Added:

Your
Cant:
Precio:

Don't Forget!

Click For Details + Cerrar
 
 

 
 
 

 

Los clientes también han comprado

 
 
 

LampGardProtección para faros

REPRESENTANTE IMAGEN drag or hover to zoom

Representative Photo Gallery

LampGard Instalación BY WEATHERTECH
LampGard_Installation12 BY WEATHERTECH
LampGard_Installation13 BY WEATHERTECH
LampGard_Installation14 BY WEATHERTECH
LampGard_Installation15 BY WEATHERTECH
LampGard_Installation16 BY WEATHERTECH
+ More Images
Compartir
 

La película óptica transparente WeatherTech LampGard protege los faros, las luces de giro, las luces de estacionamiento y los faros antiniebla costosos de los vehículos. La película LampGard también ayuda a evitar rayones y rajaduras que provoca la suciedad de la calle.

Seleccione su Vehículo

Seleccione Marca
Seleccione Año
Seleccione Modelo

¿Su vehículo no figura en la lista anterior?

WeatherTech WeatherTech New LampGard LampGard La película óptica transparente WeatherTech LampGard protege los faros, las luces de giro, las luces de estacionamiento y los faros antiniebla costosos de los vehículos. La película LampGard también ayuda a evitar rayones y rajaduras que provoca la suciedad de la calle.
  • Información del Producto
  • Videos
  • Garantía limitada
    de por vida
  • Instalación
  • Opiniones de los consumidores
  • FAQ
 

Información del Producto

¡Proteja sus faros costosos, antes de que sea demasiado tarde! Introduciendo LampGard, increíblemente resistente 40 mil en grueso material doble-pulido de urethane que está ópticamente claro y se aplica (levantar y adherir) directamente ala superficie.

Este producto tiene inhibidores ultravioletas incorporados que ayuden a prevenir el material de la sequedad, endurecimiento o decoloración. Tenemos aplicaciones específicas hacia su vehículo para un ajuste exacto, y perfecto. LampGard viene con instrucciones fácil de leer que son aplicables a los headlamps, fog lamps, turn indicators y parking lights (cundo aplicable) para proteger de rasguños, quebraduras y las marcas con agujeros LampGard está disponible para la mayoría de las marcas y de los modelos del vehículo. Algunos usos se construyen para ordenar, dé un plazo por favor de 14-21 días para la entrega. Preguntas? Visite nuestra página Contact Us, o Llamar al 1-800-441-6287.

Garantía limitada
de por vida

Garantía limitada de por vida

WeatherTech Direct, LLC garantiza que todos sus productos estarán libres de todo defecto de fabricación, materiales y mano de obra durante el ciclo de vida útil para el comprador original y solo para el vehículo original en el que fueron instalados. Las exclusiones de esta garantía son el desgaste debido a condiciones muy abrasivas y a la contaminación química (como por ejemplo, el derrame de gasolina, cloro, etc.), los accidentes de tránsito, el uso indebido, el abuso, la instalación incorrecta, el uso incorrecto, etc.

Somos personas razonables y creemos en la verdadera satisfacción del cliente. Dependiendo de las circunstancias, reemplazaremos su producto sin cargo, le cobraremos un importe proporcional por el cambio o emitiremos un reembolso total o prorrateado. Nuestro objetivo es que nuestros clientes estén satisfechos de por vida y que siempre logremos una resolución justa respecto de los problemas.

Opiniones de los consumidores

 

Actualmente no hay testimonios de este producto

FAQ

 
Is this product Car Wash safe?
Yes. When properly installed, you can safely enter a car wash.
Does the LampGard kit include the Fog Lamps?
Depending on the year, make, and model of your vehicle, some kits may include the Fog Lamps. A fit note will be listed on our website if the model does not include the Fog Lamps.
How does LampGard curve over the headlamp? Mine won’t stretch all the way.
It may seem as though there is excess material around the edges. This is completely normal and is no cause for concern. Keep the material warm and continue making short squeegee strokes from the center outward, gradually working toward the edge of the lens. When working toward the edge, spread the excess material out rather than working it all into one spot. Once the excess is properly spread about the perimeter of the LampGard, the material will easily lay flat on the lens. We recommend that you seek professional assistance if you are continuing to have installation issues.
Will the bubbles go away?
Use the supplied squeegee to force the excess alcohol solution and air bubbles out to the edges of the LampGard. Over time, remaining air bubbles will disappear.
I have installed the LampGard kit on my headlights and they looked fine, but now they look foggy. Did I do something wrong?
When using the wet application technique, this is normal. The fog is the result of the alcohol/water solution evaporating from beneath the plastic. The water vapor that is produced results in a hazy appearance for several days. The haze will clear as the vapor dissipates.
Is it best to apply the LampGard kit to the lenses wet or dry?
In most cases, we have found that the wet installation yields the best-looking installation. On larger headlamp pieces, the wet installation method is recommended as bubbles and improper alignment of the material are far less likely. On smaller pieces, such as fog lamps, the dry installation method is sometimes easier. This is especially the case if the lamp is spherical in shape.
The lights on my car are heavily contoured. Is your kit hard to install on this type of light or should I have them professionally installed?
Our LampGard material is extremely pliable and can easily be contoured over dome shaped surfaces. Professional installation should not be necessary provided that you follow the instructions closely.
I have the LampGard kit almost completely applied using the wet application method, but I can't seem to get the edges to completely stick down. What am I doing wrong?
It is absolutely imperative that a hair dryer or heat gun is used in this area to seal the edges. The heat serves two purposes. First, applying heat helps evaporate the remaining alcohol/water solution from under the edges. Second, applying heat makes the plastic more pliable so that it can contour to the edge of the light. It is important to use caution when using a heat gun to warm the plastic. Only a small amount of heat is required. If you apply too much heat, you can damage the surface of the plastic.
What if I want to remove the LampGard kit at a later date?
The removal process is simply a matter of warming the plastic, and peeling the LampGard away from the surface of the headlamp. It may require significant pressure to pull the plastic away from the headlamp, but they normally the LampGards peel off without any residue left on the lens. If any adhesive remains on the surface of the headlamp, it can be removed by rubbing the excess adhesive with your thumb.
Compartir

SHARE THIS

Cerca